Lumber Cut Directly From Your Own Logs

Portable sawmill service in Shipshewana for landowners with harvested or fallen logs on-site

Rural and wooded properties around Shipshewana often hold more value in fallen or harvested timber than most landowners realize—and that value evaporates quickly when logs sit on the ground waiting for a haul to a commercial mill. Michiana Timber and Tree brings a portable sawmill directly to the log site, cutting boards and slabs on the property so the lumber stays local and the hauling cost disappears entirely. Whether the logs came from a recent harvest, storm damage, or a timber stand improvement, the milling happens where the wood already is.


The mobile mill is set up at the log location and cuts to whatever dimension and style the landowner specifies—live-edge slabs for furniture or countertops, or dimensional boards for framing, barn repair, and outbuildings. Both hardwoods and softwoods are milled, and the cut type is decided before the first pass so there is no waste from second-guessing part way through a log. Milling is handled in-house by the same team that performs timber harvesting, which means the person operating the mill understands log quality, grain direction, and how to position a cut to get the most usable board footage from each log.


Set up a site visit with Michiana Timber and Tree to review your logs and determine what cut types and board dimensions will serve your plans best.

How On-Site Milling Differs From Hauling Logs Out

When logs leave a property for a commercial mill, the landowner loses control of grading, cut sequencing, and the decision about how each log is opened. On-site milling keeps those decisions with the person who owns the wood. The mill is positioned alongside the log, the first cut exposes the grain, and adjustments to slab thickness or board width can be made log by log based on what the wood shows. For walnut and other hardwoods common to Elkhart County properties, this matters because a single miscut can turn a veneer-quality face into scrap.


After milling, the landowner receives stacked boards or slabs ready for drying—a noticeably different result than receiving rough-cut material of unknown grade from an off-site facility. The finished boards reflect the dimensions requested at the start of the job, not whatever the mill had time to run. For a farm property in the Shipshewana area with a mix of standing timber and downed logs, this approach also avoids the loading, trucking, and retrieval logistics that make small-volume milling at a commercial facility impractical.


The service covers both the setup and the cutting, and Michiana Timber and Tree handles all equipment positioning on site. Logs that are too large for a single pass are handled in sections, and the owner decides whether slabs, flitches, or dimensional stock best fits the intended use before cutting begins.

What Property Owners Ask About the Work

The questions below address how on-site sawmilling works in practice, from log preparation through finished boards. Properties in this part of Indiana commonly hold mixed hardwood stands, and the answers reflect that context.

  • What types of logs can be milled on-site, and are there size limits?

    Hardwoods and softwoods are both suitable, including walnut, oak, cherry, maple, and pine. Log diameter capacity depends on the mill head, so confirm maximum diameter before the setup visit if you have unusually large-diameter stems.

  • How should logs be positioned before the mill arrives?

    Logs should be off the ground if possible and accessible to equipment—a clear approach path of at least ten feet on one side allows the mill to be positioned correctly without repositioning multiple times. Michiana Timber and Tree will assess the site before setup begins.

  • What cut decisions are made before milling starts?

    You specify board thickness, slab width, and whether you want live-edge or straight-sawn cuts before the first pass. Once a log is opened, the grain and figure are visible and minor adjustments can be made, but the primary cut plan is set in advance to avoid waste.

  • How does milling on a Shipshewana-area rural property differ from a suburban lot job?

    Rural farm properties typically allow equipment access without the tight setback constraints found on smaller residential lots, so the mill can be positioned for the most efficient cut angle. Properties near Goshen with older farmstead layouts may require a site walk to confirm access before scheduling.

  • What does finished lumber look like once milling is complete?

    Boards come off the mill in rough-sawn form—dimensionally accurate to your specifications but with a textured surface that requires planing or sanding before finish work. Live-edge slabs retain the natural edge of the log and are typically used as-is or lightly cleaned up for furniture and countertop applications.

Michiana Timber and Tree also provides portable sawmill service in Goshen, James Lake, Snow Lake, South Bend, and Middlebury. To move forward, contact Michiana Timber and Tree at (260) 350-3622 to describe your log volume and discuss what cut types fit your intended use before a site date is set.