Large Trees Taken Down Without Damaging What Stays

Tree removal in Shipshewana for large walnuts and oaks on tight wooded lots with no clear drop zone

Wooded residential lots in Shipshewana frequently leave no room to drop a tree in a single controlled fall. Houses positioned close together with mature hardwoods between them require a different removal sequence—taking the tree down in sections from the top, with a crane and rigging controlling each piece as it comes off. Michiana Timber and Tree handles these constrained removals, and unlike contractors who chip everything on site, the company sections usable trunks into larger lengths and sells that timber back to the homeowner.


Where a clear drop zone exists, the tree is felled in a planned direction, which is faster and straightforward. Where it does not—a large walnut sitting between two houses, for example—the crew rigs the top sections and lowers them under control before working down the trunk. Trunks are cut into longer lengths rather than short rounds, which preserves the wood's value rather than reducing it to firewood. The crew has been operating with its own equipment and in-house personnel since 2004, with full licensing, bonding, and insurance in place for every job.


Arrange a site review with Michiana Timber and Tree to determine which removal method applies to your property and what the usable timber from your tree may be worth.

The Difference Between Sectioning and Chunking a Removal

Most tree removal contractors reduce every trunk to manageable rounds on site, which is efficient for the crew but eliminates any timber value in the wood. The decision to section a trunk into longer lengths instead requires planning the cut sequence before the tree comes down—knowing where the clear, defect-free sections are, how long they can be cut while staying manageable for rigging, and what mill dimensions actually bring money. Michiana Timber and Tree makes those decisions at the site and cuts accordingly, so a large walnut that was a problem tree can return real value rather than disappearing into a chipper.


Once the work is complete, the property no longer has a hazardous or oversize tree in a constrained location, and the site is cleared of debris. The timber that came out has been sectioned to preserve its value rather than being disposed of as waste. For older properties with mature hardwoods—common on wooded lots throughout the Shipshewana area—that distinction can mean the difference between a removal job that costs money and one that partially offsets it. The approach also matters for the surrounding trees and structures: controlled sectioning from the top means adjacent plantings and nearby structures are not at risk from a dropped canopy.


Removal scopes vary depending on whether the tree can be felled directionally, whether crane access is required, and whether the trunk has significant defect that reduces usable length. The crew assesses all of this during the site visit before work begins.

Answers About How the Removal Work Is Done

Property owners dealing with large hardwoods on tight lots often have specific questions about how the removal is actually sequenced and what happens to the wood. The answers below address the process directly.

  • How does the crew decide whether to drop a tree in one direction or remove it in sections?

    The decision is based on whether the fall zone—the area the tree would occupy if dropped—is clear of structures, lines, fences, and neighboring trees. If anything occupies that zone, the tree comes down in sections from the top. On typical Shipshewana wooded lots with houses close together, sectioned removal is the more common outcome.

  • What does rigging and crane-assisted removal involve during a sectioned takedown?

    Rigging involves attaching lines to a section of the tree before the cut is made, so the piece is under tension and lowered in a controlled path rather than falling freely. A crane provides the lift and positioning that would otherwise require multiple rigging setups in a large tree.

  • How are usable timber sections identified before the tree comes down?

    Clear, straight sections without major knots, cracks, or decay are the ones worth preserving. On large walnuts and oaks, those sections are typically in the lower trunk—the crew identifies the cut points before the top sections are removed so nothing of value is lost in the sequencing.

  • What happens to the site after the removal is finished?

    All debris is cleared, and the usable timber is sectioned and set aside for the homeowner. What remains is a cleared site with a stump at grade, which can be addressed separately with stump grinding if needed.

  • Why do large hardwoods between houses require more planning than trees in open yards?

    The failure mode of an uncontrolled piece—a large oak section dropping rather than being lowered—is proportional to the weight of the piece and the proximity of what is below it. Dense canopy also limits line placement, so the rigging setup has to be planned around what attachment points are actually accessible at each height.

Michiana Timber and Tree also removes trees in Goshen, James Lake, Snow Lake South Bend, and Middlebury. Contact Michiana Timber and Tree directly at (260) 350-3622 to set up a site visit and get a clear picture of what your specific removal involves.